Bosch WAX32KH0BY, User Manual And Installation Instructions

Page: 42 / 72

en
Home Connect
42
Basic setting Programme position Value Description
Software update 5 UdP Install software update.
→
"Software update",
Page 44
Reset network settings 6 rES Reset network settings.
→
"Resetting the appli-
ance network settings",
Page 44
Connect to the energy
manager 7 EnG Energy manager.
→ "Connecting the appli-
ance to the energy man-
ager", Page 45
Connecting the appliance to a
WLAN home network (Wi-Fi)
with WPS function
Using your router's WPS function is the
simplest way to connect the appliance
to your home network.
Requirement:
If your router has a WPS
function, you can connect the appli-
ance to your WLAN home network (Wi-
Fi) automatically.
1.
Press and hold
Remote Start
for
approx. 3 seconds.
a
The display shows
Aut
.
2.
Press
Start / Reload
.
3.
Press the WPS button on the router
within the next 2 minutes.
Take note of the information in the
documents for your router.
a
flashes in the display.
a The appliance attempts to connect
to your WLAN home network.
a If the display shows
con
and
lights up permanently, the appliance
is connected to the home network.
4.
If the display shows
Err
, the appli-
ance is not connected to the home
network.
‒
Check whether your appliance is
in range of your home network.
‒
Reconnect the appliance to the
WLAN home network (Wi-Fi) with
WPS function.
5.
Connect your appliance to the Home
Connect app. →
Page 43
Connecting the appliance to a
WLAN home network (Wi-Fi)
without WPS function
If your router does not have a WPS
function, you can connect the appli-
ance to your WLAN home network (Wi-
Fi) manually. The appliance quickly
sets up its own Wi-Fi network. You can
connect a mobile device to the WLAN