Bosch WAX32K50NL, User Manual And Installation Instructions

Page: 34 / 64

NLService
13.8 Adding laundry 13.10 Resume program at
rinse hold
After the program has started, you
can remove or add laundry
depending on the program status.
Requirements
sThe rinse hold is activated.
→ "Buttons", Page 26
sThe last rinse of the
The set program has ended and the
laundry is in the rinse water.
Required:A program has started.
→ "Starting the program", Page
33
1.
The programCentrifugeor set a
drain program.
→ "Programs", Page 27
1.
onStart/Refill to press.
The device pauses.
Remark:If you want to add laundry,
follow the instructions on the
display.
→ "Display", page 23
2.
onStart/Refill to press.
13.11 Remove laundry
2.
Open the door.
3.
Reload or remove the laundry.
4.
Close the door.
5.
onStart/Refill to press.
1.
Open the door.
2.
Remove the laundry from the
drum.
13.12 Switching off the device
13.9 Program Cancel
1.
Press .
1.
onStart/Refill to press.
2.
Open the appliance door.
2.
Wipe the rubber sleeve dry and
remove any foreign objects.
At high temperature and high
water level, the appliance door
remains locked for safety reasons.
– Start the program at a high
temperatureTo rinse.
– Start the program at a high water
levelCentrifuge or select a
suitable program for draining.
→ "Programs", Page 27
3.
Remove the laundry.
→
"Taking out the laundry",
Page 34
3.
Leave the appliance door and detergent
drawer open to allow the residual
water to dry out.
34