Bosch WAX32K50NL Page 13 User Manual And Installation Instructions Download

Page: 13 / 64

Set up and connect

The device has an aqua sensor.

Remove the accessories from the

drum.

aThe aquasensor monitors during

the flush adjusts the turbidity of the

flush water and adjusts the duration

and number of flushing cycles

accordingly.

Close the appliance door.

4.2 Package contents

After unpacking, check all parts for

transport damage and the

completeness of the delivery.

3.3 Energy Saving Mode

PAY ATTENTION!

Use with incomplete or defective

accessories may impair the operation

of the device or cause material

damage and damage to the device.

▶

Do not use the device with

incomplete or defective accessories.

▶

Replace the accessories before

using the device.

→

"Accessories", Page 31

If you do not operate the device for a

long time, it automatically switches

to energy-saving mode.

The energy saving mode is exited

when you operate the device again.

If you do not operate the device

further, it will switch off.

4 Set up and connect

Remark:The device has been checked

at the factory for correct operation.

Water stains may remain in the

device. The stains disappear after the

first wash.

4.1 Unpacking device

PAY ATTENTION!

Objects that remain in the drum and

that are not intended for use with the

device can lead to material and device

damage.

▶

Before use, remove all these items

and the supplied accessories from

the drum.

The delivery consists of: s

Washing machine

sAccompanying documents s

Transport protections

→

"Remove transport locks", page

scover caps

sBend for fixing

the water drain hose

Completely remove packaging

material and protection from the

device.

4.3 Installation site

requirements

→

"Disposal of the packaging",

Page 12

WARNING

Risk of electric shock!

The device contains live parts.

Touching live parts is dangerous.

▶

Do not use the appliance without

a cover.

Check the device for visible

damage.

Open the appliance door.

→

"The Ministry in Essence",

Page 32

Summary of Contents for WAX32K50NL

































































Search results

Summary of Contents for WAX32K50NL

Reviews:

Related manuals for WAX32K50NL

Brands by name

Popular brands

Bosch WAX32K50NL, User Manual And Installation Instructions

Search results

Summary of Contents for WAX32K50NL

Reviews:

Related manuals for WAX32K50NL

Brands by name

Popular brands