en
Basic operation
48
13.2 Setting a programme
1.
Set the programme selector to the
required programme.
→
2.
If necessary, adjust the pro-
gramme settings →
Setting additional programmes
1.
Set the
Additional Programs
pro-
gramme.
2.
Press
to call up the sub-menu
for additional programmes.
3.
Select a programme.
4.
Press
Main menu
to call up the
main menu.
5.
Adjust the programme settings if
required.
6.
Start the programme.
13.3 Adjusting the pro-
gramme settings
Requirement:
A programme has
been set.
→
"Setting a programme", Page 48
▶
Adjust the programme settings.
→
Please follow the information about
operating logic →
.
Notes
¡
The programme settings are not
saved permanently for the pro-
gramme.
¡
The setting is saved if you activate
or deactivate the intelligent dosing
system.
Adjusting additional programme
settings
1.
Press
Options
to call up the sub-
menu for the additional pro-
gramme settings.
2.
Select the programme settings.
The programme settings are not
saved permanently for the pro-
gramme.
3.
Press
Options
to call up the main
menu.
13.4 Saving the programme
settings
1.
Set the
Memory
programme.
Summary of Contents for WAX28EH1GB
Page 65: ...Cleaning and servicing en 65 3 Connect the water inlet hose and check for leaks ...
Page 81: ......
Page 82: ......
Page 83: ......