Intelligent dosing system
en
29
Initial use/filling the
dispensers
Refer to the manufacturer's instructions
when choosing your detergent and
fabric softener. We recommend the use
of standard, universal and colour liquid
detergents for all machine-washable,
coloured fabrics made of cotton or
synthetic materials.
Notes
■
Only use easy-pour liquid products
that the manufacturer recommends
adding to the detergent drawer.
■
Do not mix different liquid
detergents. If changing your liquid
detergent (type, manufacturer, etc.),
empty the dispenser completely and
■
Do not use products containing
solvents, caustic agents or volatile
substances (e.g. bleach).
■
Do not mix detergent and fabric
softener.
■
Do not use products that have
expired or are highly congealed.
■
To prevent drying out, do not leave
the dispenser lids open for a long
period of time.
Filling the dispensers:
The lids of the dispensers in the
detergent drawer are marked with the
following symbols:
■
ß
Standard/universal detergent
■
i
Fabric softener
1.
Open the detergent drawer.
2.
Open the dispenser lid(s).
3.
Add detergent and/or fabric
softener. Do not fill above the
max.
marking.
4.
Close the lid(s).
5.
Slowly push the detergent drawer in
completely.
When the appliance is switched on, the
fact that the detergent drawer is closed
completely is indicated by the following:
■
If intelligent dosagei-DOS
w
or
i-DOS
i
has been selected, the
corresponding indicator lights up.
■
If intelligent dosage has not been
selected, the indicator flashes once
and then goes out.
■
The
ù
symbol in the display panel
goes out.
Everyday use
Indicator lights in the display panel:
■
The display
lights up
if intelligent
dosage has been selected for the
dispenser.
■
The display
flashes
if the fill level of
the selected intelligent dosing
dispenser is below the minimum
level.
