en
Intelligent dosing system
44
Filling the dispensers:
The lids of the dispensers in the
detergent drawer are marked with the
following symbols:
■
ß
Standard/universal detergent
■
i
Fabric softener
1.
Open the detergent drawer.
2.
Open the dispenser lid(s).
3.
Add detergent and/or fabric
softener. Do not fill above the
max.
marking.
4.
Close the lid(s).
5.
Slowly push the detergent drawer in
completely.
When the appliance is switched on, the
fact that the detergent drawer is closed
completely is indicated by the following:
■
If intelligent dosage i-DOS
w
or
i-DOS
i
has been selected, the
corresponding indicator lights up.
■
If intelligent dosage has not been
selected, the indicator flashes once
and then goes out.
■
The
ù
symbol in the display panel
goes out.
Everyday use
Indicator lights in the display panel:
■
The display
lights up
if intelligent
dosage has been selected for the
dispenser.
■
The display
flashes
if the fill level of
the selected intelligent dosing
dispenser is below the minimum
level.
(De)selecting intelligent dosage and
adjusting the dosage strength:
The intelligent dosages for detergent
and fabric softener are set at the factory
for programmes in which intelligent
dosage can be used.
Overview of programmes
The dosage strength has been preset to
low (lightly soiled laundry) for
detergent
w
and to medium
(medium level of softness) for fabric
softener
i
. It can be changed for each
programme.
In addition to intelligent dosage,
cleaning aids (e.g. stain remover) can
be added manually to compartment
v
u
, if necessary.
Note:
The selection (on/off) and the
selected dosage strength for i-DOS
i
and i-DOS
w
are saved for each
programme until they are changed
again, even if the washing machine is
switched off.
