background image

       

2

Your new washing machine

You have chosen a Bosch washing 

machine. 

Please take a few minutes to read and 

become familiar with the advantages of 

your washing machine.

To meet the high quality demands 

required by Bosch, every washing 

machine that leaves our factory is 

carefully checked to ensure that it 

functions correctly and is in perfect 

condition.

For more information on our products, 

accessories, replacement parts and 

services, see our website www.bosch-

home.com or contact our after-sales 

service centres.

If the operating and installation 

instructions describe different models, 

any differences will be pointed out at the 

relevant points in the text.

Read these operating and installation 

instructions before switching on the 

washing machine.

Display rules

:

 Warning!

This combination of symbol and signal 

word indicates a possibly dangerous 

situation. Not heeding the warning can 

cause death or injuries.

Caution!

This signal word indicates a possibly 

dangerous situation. Not heeding the 

caution can cause property and/or 

environmental damage.

Note/tip

Information about the optimum use of 

the appliance/any other useful 

information.

1. 2. 3. / a) b) c)

The steps are represented by numbers 

or letters.

/ -

Lists are represented by a small box or 

a dash.

Summary of Contents for WAW24420GR









































Reviews: