NL Troubleshooting
Malfunction
Cause and Troubleshooting
Spin result is
not to satisfaction-
ness. The laundry is
too wet / too damp.
The unbalance detection system has aborted the spin
due to uneven distribution of the laundry.
▶
Redistribute the laundry in the drum.
Note: If possible, place large and small items of
laundry together in the drum. Laundry of different
sizes distributes itself better when spinning.
▶
Start the program Centrifuge.
Unbalance control system compensates for
imbalance through reduced spin speed.
▶
Redistribute the laundry in the drum.
Note: If possible, place large and small items of
laundry together in the drum. Laundry of different
sizes distributes itself better when spinning.
▶
Start the program Centrifuge.
Detergents can contain water-insoluble substances
Detergent residue on
the damp laundry. which settle on the laundry.
▶
Start the program Flush.
Detergent residue on
the dry laundry.
Detergents may contain water-insoluble
substances, which deposit on the laundry.
▶
Brush the laundry after washing and drying.
Home Connect func-
dishonor not correctly.
Various causes are possible.
▶
Go to www.home-connect.com.
No connection to
the home network.
Wi-Fi is turned off.
▶
Activate WiFi on the device", page 45 Pagina
Wi-Fi is activated, but the connection to the home
network cannot be established.
1.
Verify that the home network is available.
2.
Reconnect the device to the home network.
"Device with WLAN home network (WiFi) with
Connect WPS function", page 42
"Device with WLAN home network (WiFi) without
Connect WPS function", page 43
At the water supply
feed hose is leaking water.
The water inlet hose is not correctly / firmly
connected.
1.
Connect the water supply hose correctly. Connect
water inlet hoseslang
2.
Tighten the coupling properly.
64