Bosch WAV28L90ME, User Manual And Assembly Instructions

Page: 48 / 60

en
Troubleshooting
48
Fault Cause troubleshooting
The filter in the water inflow
is blocked.
▶
"Clean the water inflow filter"
→
Page 46 .
The tap is turned off.
▶
Turn on the tap.
The water inlet hose is
kinked or jammed.
▶
Ensure that the water inlet hose is
not kinked or jammed.
"E:35 / -10" There is water in the base
trough.
▶
Turn off the water tap.
▶
Call the after-sales service.
→
"Customer Service", Page 56
The appliance is leaking.
▶
Turn off the water tap.
▶
Call the after-sales service.
→
"Customer Service", Page 56
flashes.
The automatic voltage con-
trol system detects an unau-
thorised voltage under-us-
age.
▶
No remedial action possible.
Note: If the power supply is stable, the
programme continues to run as nor-
mal.
flashes.
Voltage under-usage causes
a programme extension. No remedial action possible.
Detergent dosage is too
high.
▶
Immediate measure: Mix one table-
spoon of fabric softener with 0.5
litres of water and pour the mixture
into the left-hand compartment (not
for outdoor clothing, sportswear or
items stuffed with down).
▶
Reduce the amount of detergent for
the next washing cycle with the
same load.
All other error codes. Malfunction
▶
Call the after-sales service.
→
"Customer Service", Page 56
Malfunctions
Fault Cause troubleshooting
The appliance is not work-
ing. The mains plug of the power
cord is not plugged in.
▶
Connect the appliance to the power
supply.
The circuit breaker is faulty.
▶
Check the circuit breaker in the
fuse box.
There has been a power cut.
▶
Check whether the lighting in your
kitchen or other appliances are
working.