en
operation
34
13.3 Adjusting the pro-
gramme settings
Requirement:
A programme has
been set.
→
"Setting a programme", Page 33
▶
Adjust the programme settings.
→
Observe the information about op-
erating logic →
.
Note:
The programme settings are
not saved permanently for the pro-
gramme.
Adjusting additional programme
settings
1.
Press
Optionen
to call up addi-
tional programme settings.
2.
Select the programme settings.
3.
Press
Optionen
to call up the main
menu.
13.4 Saving the programme
settings
You can save your individual pro-
gramme settings as favourites.
1.
Set the
Memory
programme.
2.
Press
to call up the sub-menu.
3.
Select a programme.
→
4.
Press
Main menu
to call up the
main menu.
5.
If required, adjust the programme
settings.
→
a
The programme is saved.
13.5 Loading laundry
Note:
To prevent creasing, note the
maximum load for the programmes.
→
Requirements
¡
The laundry is prepared and sor-
ted.
→
¡
The drum is empty.
1.
Open the door.
2.
Place the laundry in the drum.
3.
Close the door.
Ensure that there is no laundry
trapped in the door.
13.6 Inserting the measuring
aid for liquid detergent
If you order the measuring aid as an
accessory, you must use the measur-
ing aid.
1.
Pull out the detergent drawer.
2.
Press down on the insert and re-
move the detergent drawer.
3.
Insert the measuring aid.
4.
Insert the detergent drawer.
