Bosch WAU28T40ES, User Manual And Assembly Instructions

Page: 43 / 60

Cleaning and servicing
en
43
Cleaning the drain pump
Note:
Please read the information in
the "Safety" → Page 4 and "Prevent-
ing material damage" → Page 11 sec-
tions to ensure that you use the appli-
ance safely.
Requirement:
"The drain pump is
empty." → Page 41
1.
Since water may remain in the
drain pump, remove the pump cap
carefully.
2.
Clean the interior, the thread on
the pump cap and the pump hous-
ing.
3.
Make sure that the impeller in the
drain pump can be rotated.
4.
Insert the pump cap and screw it
on.
90°
The handle on the pump cap must
be in a vertical position.
5.
Insert the maintenance flap and
lock it into place.
1
2
6.
Close the maintenance flap.
Before the next wash
To prevent unused detergent from
flowing straight into the outlet in the
next wash, run the programme
after you have emptied the drain
pump.
1.
Turn on the tap.
2.
Insert the mains plug.
3.
Switch on the appliance.
4.
Pour 1 litre of water into compart-
ment II.
5.
Start the programme.