Basic operation
en
41
Basic operation
13 Basic operation
Basic operation
13.1 Switching on the appli-
ance
▶
Press .
It may take a few seconds for the
appliance to switch on.
a
The appliance performs an audible
function test in the detergent
drawer.
13.2 Setting a programme
1.
Set the programme selector to the
required programme →
.
2.
If necessary, adjust the pro-
gramme settings →
13.3 Adjusting the pro-
gramme settings
Depending on the programme and
programme progress, you can adjust
or activate/deactivate the settings.
Note:
Overview of all programme set-
tings:
Requirement:
A programme has
been set.
▶
Adjust the programme settings.
The programme settings are not
saved permanently for the pro-
gramme.
Note:
The setting is saved if you ac-
tivate or deactivate the intelligent
dosing system.
13.4 Saving the programme
settings
You can save your individual pro-
gramme settings as favourites.
Requirements
¡
A programme has been set.
¡
The programme settings have
been adjusted.
▶
Press and hold for approx. 3
seconds.
Press to call up the saved pro-
gramme.
Note:
To overwrite the saved pro-
gramme, repeat the steps above.
13.5 Loading laundry
Notes
¡
Please read the information in the
Safety →
sec-
tions to ensure that you use the
appliance safely.
¡
To prevent creasing, take note of
the maximum load for the relevant
programme →
Summary of Contents for WAU28PIHSN
Page 20: ...en Familiarising yourself with your appliance 20 1 2 ...
Page 75: ......