en
Operating the appliance
36
Cancel the programme
For programmes at high temperatures:
1.
Touch the
Start/Reload
A
button.
2.
To cool down laundry: Select
à
Rinse
.
3.
And touch the
Start/Reload
A
button again.
For programmes at low temperatures:
1.
Touch the
Start/Reload
A
button.
2.
Select
0
Spin
.
3.
And touch the
Start/Reload
A
button again.
Programme end during rinse
hold
- - - -
0
appears in the display panel
and the indicator lamp of the Start/
Reload
A
button flashes.
Continue the programme by:
■
Touch the
Start/Reload
A
button or
■
Change the spin speed (if
necessary) and then touch the
Start/
Reload
A
button again.
Note:
If the water only needs to be
drained, select programme
Drain
*
,
or touch the
Start/Reload
A
button
approx. 1 minute after the
programme starts, before the spin
cycle begins. Set programme
selector to
Off
. The programme is
interrupted and the door lock is
released. The laundry can be
removed.
Programme end
End
lights up on the display panel and
A
and
Õ
displays are off.
If you have selected 0, the water is only
drained after rinse process, no spin
cycle.
Removing laundry/switching
off the appliance
1.
Set programme selector to
Off
.
2.
Open the door and remove the
laundry.
3.
Turn off the water tap.
Note:
Not required for Aqua-Stop
models.
Notes
■
Do not leave any items of laundry in
the drum. They may shrink in the
next wash or discolour another item.
■
Remove any foreign objects from the
drum and the rubber seal – risk of
rusting.
■
Wipe the rubber seal dry.
■
Leave the door and detergent
drawer open so that any residual
water can evaporate.
■
Always wait until the programme
ends, as the appliance could still be
locked. Then switch the appliance
on and wait for it to unlock.
* depending on the model
Summary of Contents for WAU28490AU
Page 51: ...6 ...