en
Operating the appliance
32
Rinse Plus
(
Ï
Rinse Plus)
Additional rinse cycle depending on the
programme; longer programme length
for particularly sensitive skin and/or for
areas with very soft water.
Soak
(
%
Soaking)
Before the main wash cycle starts, the
washing remains for longer in the water
to partially dissolve intensive soiling.
Notes
■
Put detergent in dispenser
I
before
starting the appliance.
■
Load laundry of the same colour.
■
If your appliance does not have this
additional programme setting, you
can soak as follows:
1.
Put detergent in dispenser
II
before
starting the appliance.
2.
Select the
Cottons
40 °C
programme and the
A
Start/
Reload
button.
3.
Select the
A
Start/Reload
button
after approx. 10 minutes. The
laundry remains in the soaking
solution.
4.
Leave the laundry to soak for as long
as required, then either select the
A
Start/Reload
button again to
continue the programme or change
the programme.
1
Operating the
appliance
Operating the appliance
Note:
Install
and
connect
washing
machine properly.
Before the 1st wash
Preparing the washing
machine
Notes
■
Never switch on a damaged
washing machine!
■
Inform customer service!
1.
Connect the mains plug.
2.
Turn on the tap.
3.
Open the door.
4.
Check that the drum is completely
emptied. Empty if necessary.
Select programme/switch on
the appliance
Note:
If you have activated the
childproof lock, you must first deactivate
it before you can set a program.
Use the program selector to select the
required program. Can be rotated in
either direction.
The appliance is switched on.
The
program default settings
for the
selected program appear in the display
panel:
■
Temperature*,
■
Spin speed*,
■
The maximum load and the duration
of the program (alternately),
■
Energy consumption*.
*depending on the model
