operation
en
29
13.5 Inserting the measuring
aid for liquid detergent
If you order the measuring aid as an
accessory, you must use the measur-
ing aid.
1.
Pull out the detergent drawer.
2.
Press down on the insert and re-
move the detergent drawer.
3.
Insert the measuring aid.
4.
Insert the detergent drawer.
13.6 Adding detergent and
care product
Notes
¡
Do not use the measuring aid for
liquid detergent for gel detergents,
washing powder, or if Prewash or
"Ready in" time are activated.
¡
Observe the information about de-
tergents and care products
→
1.
Pull out the detergent drawer.
2.
Pour in detergent.
→
3.
If required, add the care product.
4.
Push in the detergent drawer.
13.7 Starting the programme
Requirement:
A programme is set.
"Setting a programme", Page 28
▶
Press
Start / Reload
.
a
The drum rotates and load detec-
tion takes place. This can take up
to 2 minutes, after which water
enters the drum.
a
The display shows the programme
duration or the programme end
time.
a
After the programme has ended,
the display shows: "End".
13.8 Changing the activated
programme end time
You can repeatedly change the set
and activated programme end time
before starting the programme.
Requirements
¡
The programme is set.
→
"Setting a programme", Page 28
¡
The programme end time is set
and activated.
→
1.
Press
Start / Reload
.
The activated programme end time
is paused.
2.
Press
Finished in
until the dis-
play shows the required pro-
gramme end time.
3.
Press
Start / Reload
.
The changed programme end time
is activated.
Summary of Contents for WAN28167BY
Page 51: ......