background image

en 

Basic operation

34

1.

Press 

Start / Reload

 

.

The appliance is paused and
checks whether it is possible to
add or remove laundry. Take note
of the programme status. 
→ 

"Display", Page 21

2.

Add or remove laundry.

3.

Close the door.

4.

Press 

Start / Reload

 

.

Cancelling the programme

Once the programme has started,
you can cancel it at any time.

Note: 

Please read the information in

the Safety → 

Page 4

 and Preventing

material damage → 

Page 11

 sections

to ensure that you use the appliance
safely.

1.

Press 

Start / Reload

 

.

2.

Open the door.
The appliance door remains
locked for safety reasons if the
temperature and water levels are
high.
– If the temperature is high, start

the 

Rinse 

 programme.

– If the water level is high: Start

the 

Spin 

 or 

Drain 

 pro-

gramme.

3.

Remove the laundry.

Resuming the programme when
the programme status is Rinse
Hold

1.

Set the 

Spin 

 or 

Drain 

 pro-

gramme.

2.

Press 

Start / Reload

 

.

Unloading the laundry

Note: 

Please read the information in

the Safety → 

Page 4

 and Preventing

material damage → 

Page 11

 sections

to ensure that you use the appliance
safely.

1.

Open the door.

2.

Remove the laundry.

Switching off the appliance

1.

Turn the programme selector to

Off

.

2.

Turn off the tap.

3.

Wipe the rubber gasket dry and re-
move any foreign objects.

Summary of Contents for WAN20051IL

























































Reviews: