en
Operating the appliance
18
Measure the detergent and care
products according to:
■
Water hardness; ask your water
supply company
■
The manufacturer's instructions on
the packaging
■
The amount of laundry
■
Soiling
Filling
:
Warning
Eye/skin irritation!
Detergent and care products may spray
out if the detergent drawer is opened
while the machine is in operation.
Open the drawer carefully.
Rinse eyes or skin thoroughly if they
come into contact with detergent/care
products.
If swallowed accidentally, seek medical
advice.
Note:
Dilute viscous fabric softener and
fabric conditioner with water; this
prevents blockages.
Pour the detergent and care products
into the appropriate compartments:
1.
Pull out the detergent drawer as far
as possible.
2.
Add detergent and/or care products.
3.
Close the detergent drawer.
Measuring aid* for liquid detergent
*depending on the model
Position the measuring aid for
measuring the correct amount of liquid
detergent:
1.
Pull out the detergent drawer. Press
down the insert and fully remove the
drawer.
2.
Slide the measuring aid forwards,
fold it down and click it into place.
3.
Reinsert the drawer.
Note:
Do not use the measuring aid for
gel detergents and washing powder, or
for programmes with prewash or when
"Ready in" time is selected.
For models without a measuring aid,
pour the liquid detergent into the
appropriate dispenser and place it in
the drum.
Start the programme
Select the
Start/Pause
A
button. The
indicator lamp lights up and the
programme starts.
During the programme, the display
panel shows the "Ready in" time or,
after starting the wash programme, the
programme duration and the symbols
for the programme progress.
Note:
If you want to lock the
programme to prevent it from being
inadvertently adjusted, you can select
the childproof lock as follows.
Measuring aid
A
For liquid detergent
Compartment
II
Detergent for the main wash,
water softener, bleach, stain
remover
Compartment
i
Fabric softener, starch
Do not exceed the
max
.
Compartment
I
Detergent for prewash