background image

en

    Operating the appliance

18

Measure the detergent and care 

products according to:

Water hardness; ask your water 

supply company

The manufacturer's instructions on 

the packaging

The amount of laundry

Soiling 

~

 Page 11

Filling

:

Warning

Eye/skin irritation!

Detergent and care products may spray 

out if the detergent drawer is opened 

while the machine is in operation.

Open the drawer carefully.

Rinse eyes or skin thoroughly if they 

come into contact with detergent/care 

products.

If swallowed accidentally, seek medical 

advice.

Note:  

Dilute viscous fabric softener and 

fabric conditioner with water; this 

prevents blockages.

Pour the detergent and care products 

into the appropriate compartments:

1.

Pull out the detergent drawer as far 

as possible.

2.

Add detergent and/or care products.

3.

Close the detergent drawer.

Measuring aid* for liquid detergent

*depending on the model

Position the measuring aid for 

measuring the correct amount of liquid 

detergent:

1.

Pull out the detergent drawer. Press 

down the insert and fully remove the 

drawer.

2.

Slide the measuring aid forwards, 

fold it down and click it into place.

3.

Reinsert the drawer.

Note:  

Do not use the measuring aid for 

gel detergents and washing powder, or 

for programmes with prewash or when 

"Ready in" time is selected.

For models without a measuring aid,

 

pour the liquid detergent into the 

appropriate dispenser and place it in 

the drum.

Start the programme

Select the 

 Start/Reload 

A

 button. The 

indicator lamp lights up and the 

programme starts.
During the programme, the display 

panel shows the "Ready in" time or, 

after starting the wash programme, the 

programme duration and the symbols 

for the programme progress. 

~

 Page 9

Note:  

If you want to lock the 

programme to prevent it from being 

inadvertently adjusted, you can select 

the childproof lock as follows.

Measuring aid 

A

For liquid detergent

Compartment 

II

Detergent for the main wash, 

water softener, bleach, stain 

remover

Compartment 

i

Fabric softener, starch 

Do not exceed the 

max

.

Compartment 

I

Detergent for prewash

Summary of Contents for WAK20200EG







































Reviews: