Bosch WAK20160GR, Instruction Manual And Installation Instructions

Page: 22 / 40

en
Setting the signal
22
M
Setting the signal
Set ti ng the si gna l
1. Activate the setting mode for the signal volume
Set to Off . Press and hold the
(Spin) 0
but-
ton + turn one position to the right.
Press and hold the button for approx.
five seconds until the display elements
light up. Setting mode is activated.
2. Set the volume for the button signals (depending on the model)
Press the button repeatedly until the desired
volume is reached.
Go to point
3 or
Set to Off , to exit the setting mode for the sig-
nal volume.
3. Set the volume for the information signals
Turn the dial one position
to the right.
Press the button repeatedly
until the desired volume is
reached.
Set to Off , to exit the setting mode for the signal
volume.