en
Cleaning and servicing
38
6.
To allow the detergent solution to
flow out into the container, remove
the pump cap carefully.
Cleaning the drain pump
Note:
Please read the safety informa-
to ensure that you use
the appliance safely.
Requirement:
1.
Clean the inside and the thread on
the pump cap and pump housing.
2.
Make sure that the impeller in the
drain pump can be turned.
3.
Insert the pump cap and screw it
on.
90°
The handle on the pump cap must
be in a vertical position.
4.
Insert the maintenance flap and
lock it into place.
1
1
2
5.
Close the maintenance flap.
Before the next wash
To prevent unused detergent from
flowing straight into the outlet in the
next wash, run the
programme
after you have emptied the drain
pump.
1.
Turn on the tap.
2.
Insert the mains plug.
3.
Switch on the appliance.
4.
Pour 1 litre of water into compart-
ment II.
5.
Start the
programme.
