en
Troubleshooting
44
Fault
Cause
troubleshooting
"E:60 / -2B"
The unbalanced load detec-
tion system has interrupted
the spin cycle because the
laundry is unevenly distrib-
uted.
▶
Redistribute the laundry in the
drum.
Note:
Where possible, mix large and
small items in the drum. Different sized
items of laundry distribute themselves
better during the spin cycle.
The water pressure is low.
No remedial action possible.
The filters in the water inflow
are blocked.
▶
Clean the filters in the water inflow
The tap is turned off.
▶
Turn on the tap.
The water inlet hose is
kinked or jammed.
▶
Ensure that the water inlet hose is
not kinked or jammed.
lights up.
The temperature is too high.
▶
Wait until the temperature has
dropped.
▶
Water level is too high.
▶
Start the
Odpompowanie
pro-
gramme.
Laundry is caught in the
door.
1.
Open the door again.
2.
Remove any trapped laundry.
3.
Close the door.
4.
Press
/
Dodaj pranie
to start
the programme.
flashes.
Door is not closed.
1.
Close the door.
2.
Press
/
Dodaj pranie
to start
the programme.
All other error codes.
Malfunction
▶
Call the after-sales service.
Malfunctions
Fault
Cause
troubleshooting
The appliance is not work-
ing.
The mains plug of the power
cord is not plugged in.
▶
Connect the appliance to the power
supply.
The circuit breaker is faulty.
▶
Check the circuit breaker in the
fuse box.
There has been a power cut.
▶
Check whether the lighting in your
kitchen or other appliances are
working.
Summary of Contents for WAJ2006GPL
Page 55: ......
