1 697 090 700
2014-04-10
|
Robert Bosch GmbH
8 | VLS 5235 | Product Description
en
4.3
Inspection log
An inspection log is to be kept as a record of the lifting
platform checks performed. The inspection log book
must contain a report on the test performed prior to
initial commissioning and the regular and exceptional
checks, as well as the applicable certification on (EC)
type testing and the EC declaration of conformity.
The report must include:
R
The date and scope of testing with details of any test
items not yet performed
R
The results of the test with details of any
shortcomings established
R
An assessment of whether there are any
impediments to start-up or further use
R
The details of any follow-up testing required
R
The name, address and signature of the person
carrying out the checks
i
The acknowledgement and rectification of any
shortcomings found must be confirmed by the plant
operator in the report.
5.
Product Description
5.1
Designated use
The type-approved lifting platform VLS 5235 is intended
solely for the following use:
R
Lifting of passenger/motor vehicles using the
runways.
R
Lifting of passenger/motor vehicles using the
auxiliary lift.
R
Additionally for the VLS 5235:
Wheel alignment using the sliding plates
(optional turntables required).
The limit values for load-bearing capacity and load
distribution must be complied with.
The following regulations must be observed when
starting up and operating lifting platforms:
R
Rules for lifting platform operation (BGR 500)
R
Basic principles for testing lifting platforms
(BGG 945)
R
Rules for keeping the inspection log (BGG 945-A2)
The lifting platform is not to be used as a crane or as
a support for other lifting mechanisms (e.g. block and
tackle).
The lifting platform is designed such that people
can stand under the loadbearing elements. It is not
equipped to permit walking on the lifting platform or
for conveying people.
Erection of the lifting platform is prohibited in
explosion and fire hazard areas, outdoor areas and in
damp atmospheres (e.g. washing shops).
The original operating instructions must be kept in
a conspicuous, constantly accessible location near
the lifting platform. All the above regulations must be
heeded as well as the applicable rules on work safety
and accident prevention.
5.2
Floor-mounted and underfloor
versions
This documentation describes only the under floor
version of the VLS 5235.
The above floor version is identical in terms of
technology but is supplied with 2 Drive-on ramps
instead of 4 Drive-on flaps.
