Bosch VLS 3132 H, Original Instructions Manual

Page: 30 / 196

1 689 989 107 2012-09-10
|
Robert Bosch GmbH
30 | VLS 3132 H | Operation en
6.6 Lowering the vehicle
DANGER – Risk of vehicle falling or tipping!
Risk of (fatal) injury when lowering the support
arms and the vehicle.
¶
Ensure that the elastomer retainers are firm-
ly affixed to the lifting points.
¶
Avoid jerky movements of the vehicle and
lifting platform.
DANGER – Risk of crushing when lowering
the lifting platform!
Risk of (fatal) injury when lowering the lifting
platform.
¶
Make sure that there are no persons in the
vehicle or in the vicinity of the lifting plat-
form.
¶
Ensure that there are no objects in the vici-
nity of the lifting platform.
¶
Keep a safe distance from the lifting plat-
form.
1. Remove unsecured tools and other objects from the
vehicle and the lifting platform.
2. Turn the rotary reversing switch to "lowering" (
u
)
and hold it in this position.

The lifting tables move downward as long as the
button is pressed.

Lowering of the running rail is stopped automati-
cally at a height of 300 mm ("foot protection" sa-
fety level).
3.
Check the area beneath the running rail.
4. If it is safe to do so, press and hold the "foot protec-
tion" confirmation button.
5. Turn the rotary reversing switch to "lowering" (
u
)
again and hold it in this position.
 A warning signal sounds and the lifting platform
moves down to its lowest position.
"
The lifting platform and vehicle are now fully lowe-
red.
6.7 Driving the vehicle off
1. Make sure that the lifting platform is fully lowered.
2. Remove the elastomer retainers.
3. Lower the access ramps.
4. Ensure that the exit area is unobstructed.
5. Drive the vehicle off the lifting tables in a straight
line.
"
The lifting platform is now empty.
6.8 Deactivation
1. Use a padlock to secure the rotary reversing switch
in the OFF position (O).
"
The lifting platform is deactivated and locked.