6 000 836 999
2013-05-08
|
Bosch Automotive Diagnostics Equipment (Shenzhen) Limited
Decommissioning|��������|17
��������|17
|17
en
8.4.�
Maintenanceschedule
Daily:
Component Action
Stickers
Visual inspection:
All stickers must be affixed and clearly legible.
Mounts
Visual inspection:
Mounts must be clean, free from grease and in-
tact.
Support
arms
Visual inspection:
Support arms must not be damaged. Check lock-
ing.
Lifting car-
riages
Visual inspection:
Lifting carriages must not be damaged.
Wiring
Visual inspection:
No damage to insulation.
Hydraulic
system
Visual inspection:
No escape of fluid.
Locking
pawls
Functional test:
Locking pawls must extend and retract properly.
Monthly:
Component
Action
Exposed sur-
faces and edg-
es
Cleaning:
Clean all contaminated surfaces and apply pre-
servative agent if applicable.
Exposed sur-
faces and edg-
es
Paintwork care:
Sand down paintwork blemishes with sand pa-
per (grain size 120) and touch up with the ap-
propriate RAL shade.
Synchroniz-
ing cables and
pulleys
Visual inspection:
Components must not be damaged or worn.
Typical examples of cable damage: In- dividu-
al wire breaks, kinking, constriction, flattening,
looping, tangling.
Pay particular attention to cables in the area of
the threaded end pieces.
Limit switch
Functional test:
Raise the switch rod.
Every�months:
Component
Action
Support arms
Lubricate the shafts (lithium grease).
Mounts
Lubricate the spindles (lithium grease).
Make sure the mounts cannot be completely
screwed out.
Every6months:
Component
Action
Hydraulic unit Check fluid level in tank:
Dipstick must be immersed in fluid (max. 5
mm) when lifting platform is fully lowered.
Top up with specified hydraulic fluid if neces-
sary.
Sliders at lift-
ing carriage
Lubricate the inner surfaces of the lifting posts
(multi-purpose grease).
Shear connec-
tor
Check tightening torque.
Retighten to specified torque if necessary.
9.
Decommissioning
9.1
Temporaryshutdown
In the event of lengthy periods of non-use:
¶
Disconnect the VLH 2235H from the mains.
¶
Lock the main switch.
9.�
Changeoflocation
¶
If the VLH 2235H is passed on, all the documentation
included in the scope of delivery must be handed over
together with the unit.
¶
The VLH 2235H is only ever to be transported in the
original or equivalent packaging.
¶
Heed the notes on initial commissioning.
9.�
Disposalandscrapping
9.�.1
Substanceshazardoustowater
!
Oils and greases as well as refuse containing oil and
grease (e.g. filters) represent a hazard to water.
1.
Substances hazardous to water must not be allowed
to enter the sewage system.
2.
Substances hazardous to water must be disposed of
in accordance with the applicable regulations.
9.�.�
��������andaccessories
1.
Disconnect the VLH 2235H from the mains and de-
tach the power cord.
2.
Dismantle the VLH 2235H and sort out and dispose
of the different materials in accordance with the ap-
plicable regulations.
The��������issubjecttotheEuropean
directiveENG149�.
Dispose of used electrical and electronic
devices, including cables, accessories and
batteries, separately from household waste.
¶
Make use of the local return and collection
systems for disposal.
¶
Proper disposal of the VLH 2235H pre-
vents environmental pollution and possible
health hazards.
