© Bosch Healthcare Solutions GmbH
16
Instructions for use
Menu
5.5 Configuration of data export to USB or network drive
Log in as an
administrator
for access.
4
C O N T I N U E
enabled
In the
menu
, select
settings
, select
network/interfaces
, then select
export configuration
.
To configure or set up a new USB location:
Select
configure export
:
As export location select
USB
and make sure a USB drive is inserted.
Follow the instructions displayed on the screen.
To configure or set up a new network location:
Select
configure export
:
As export location select
network
. The following components have to be set manually:
• Location
• Username
• Password
Follow the instructions displayed on the screen.
To view the current configuration, select show export configuration.
5.6 Printer configuration
Log in as an
administrator
for access.
4
C O N T I N U E
enabled
In the
menu
, select
settings
then select
printer configuration
.
To configure an existing printer as standard printer:
Select
configure
printer:
A list of configured printers will be displayed.
To set a
standard
printer, mark it in the list
4
C O N T I N U E
enabled
To remove a printer from the list, press
delete
.
To configure a new printer:
Press
add printer
and select the desired
printer interface
:
• USB
• Network
• Shared
A list of available printers for the selected interface will be displayed. Select the desired printer or URL.
Follow the instructions displayed on the screen.
To view the current configuration, select show printer configuration.
Printer must be selected and switched on.
4
C O N T I N U E
enabled
Summary of Contents for Vivalytic
Page 1: ...Instructions for use ...