8 | High‑Speed Positioning System
Sensitivity (3200 k)
Sensitivity
(full video)
5
1.4 lx (0.14 fc)
Sensitivity 50 IRE
5
0.35 lux / 0.14 lux (NightSense)
(0.035 fc / 0.014 fc (NightSense))
Minimum
Illumination
5
0.18 lux / 0.08 lux (NightSense)
(0.018 fc / 0.008 fc (NightSense))
Minimum Illumination
with SensUp
0.018 lux / 0.008 lux (NightSense)
(0.0018 fc / 0.0008 fc (NightSense))
Horizontal Resolution 540 TVL
Signal-to-Noise-Ratio > 50dB
Video Output
1Vpp, 75 Ohm
Y/C Output
Y: 1 Vpp / C: 0.3 Vpp
Synchronization
Internal, Line Lock, HV-lock and Genlock (Burst
lock) selectable
Shutter
Auto (1/60 [1/50] to 1/500000), fixed, flicker-
less, default
Night Sense
Auto, Forced, Off
SensUp
Off, automatic continuous up to 10x
Auto Black
On/Off selectable
Dynamic Range
32x dynamic range enhancement
Dynamic Noise Reduc-
tion
Auto, Off selectable
Contour
Sharpness enhancement level selectable
BLC
Off, area and level selectable
Gain
Auto (maximum level selectable to 28 dB) or fixed
level selectable
White Balance
ATW (2500–10000 K), AWB hold, manual WB se-
lectable
VMD
Four (4) area, sensitivity selectable
Alarm Output
VMD or Bilinx
Alarm Input (TTL)
Profile switching, +5 V nominal, +40 VDC max.
Alarm Output Relay
Max. 30 VAC or +40 VDC, max. 0.5 A continuous,
10 VA
External Synchronal
Input
75 Ohm or High Impedance selectable
Cable Compensation Up to 1000 m (3000 ft) coax without external
amplifiers (automatic setup in combination with
coaxial communication)
Camera ID
16-character editable string, position selectable
Remote Control
Bi-directional coaxial communication
5. F/1.2, 89% reflection, SensUp off
UPH-C630 Series
Camera Model
LTC 0630 Dinion 2X Day/Night, 1/2-inch Digital
CCD Camera
Active Pixels
NTSC
768 H x 494 V
PAL
752 H x 582 V
Sensitivity (3200 K, scene reflectivity 89%, F1.2)
Full video
(100 IRE)
Usable picture
(50 IRE)
Usable picture
(30 IRE)
Color
1.4 lx
(0.14 fc)
0.31 lx
(0.031 fc)
0.18 lx
(0.018 fc)
Color
+ SensUp 10x
0.14 lx
(0.014 fc)
0.031 lx
(0.0031 fc)
0.018 lx
(0.0018 fc)
Monochrome
-
0.052 lx
(0.0052 fc)
0.024 lx
(0.0024 fc)
Monochrome
+ SensUp 10x
-
0.0052 lx
(0.00052 fc)
0.0024 lx
(0.00024 fc)
Horizontal Resolution
540 TVL
Signal-to-Noise Ratio
>50 dB
Video Output
Composite video 1 Vpp, 75 ohm
Synchronization
Internal, Line Lock, HV-lock and Genlock
(Burst lock) selectable
Shutter
Auto (1/50 [1/60] to 1/10000) selectable
Auto (1/50 [1/60] to 1/50000) automatic
flickerless, fixed selectable
SensUp
Adjustable from Off up to 10x
Day/Night
Color, Mono, Auto
Auto Black
Automatic continuous, Off
Dynamic Engine
XF-Dynamic, SmartBLC
Dynamic Range
96 dB (16-bit image processing)
Dynamic Noise Reduction Auto, On/Off selectable
Sharpness
Sharpness enhancement level selectable
SmartBLC
On/Off
AGC
AGC On/OffOff (0 dB) selectable
Peak White Invert
On/Off
White Balance
ATW, ATWhold and manual (2500–10000 K)
Alarm Output
VMD or Bilinx
Alarm Input (TTL)
Profile switching, +3.3 V nominal, +40 VDC
max.
Alarm Output Relay
30 VAC or +40 VDC, max. 0.5 A continuous,
10 VA
External Synchronization
Input
75 Ohm or High Impedance selectable
Cable Compensation
Up to 1000 m (3000 ft) coax without exter-
nal amplifiers (automatic set-up in combina-
tion with Bilinx coaxial communication)
Camera ID
17-character editable string, position selecta-
ble
Test Pattern Generator
Color bars 100%, Greyscale 11-step, Saw-
tooth 2H, Checker board, Cross hatch, UV
plane
Modes
Six (6) preset programmable modes
Remote Control
Bilinx coaxial bi-directional communication
Video Motion Detection
One (1) area, fully programmable
Controls
OSD with soft-key operation (multi-lingual)
