background image

General safety instructions and explanation of symbols

 | 

3

6 720 648 163 (2011/05)

1

General safety instructions and explanation of symbols

1.1

Explanation of symbols

Signal words are used to indicate the level of risk if 
counter measures are not taken.

Caution

 indicates that minor damage to property may 

occur.

Warning

 indicates that minor personal injury or 

severe damage to property may occur.

Danger

 means that severe personal injury may occur. 

Very serious cases may result in death.

Notes contain important additional information.

Notes do not contain any warnings or information about 
hazards or risks.

1.2

Safety instructions

If you smell gas

B

Turn off the gas cock.

B

Open windows and doors.

B

Do not operate any electrical switches or equipment 
such as telephones, power plugs and doorbells.

B

Extinguish all open flames. 

B

Do not smoke.

B

Do not use lighters of any kind.

B

Warn all ooccupants of the building, but do not ring 
doorbells.

B

If you can actually hear gas escaping, leave the 
building immediately. Prevent others from entering 
and notify the police and fire department 

from 

outside

 the building.

B

From outside the building

, call gas supplier and 

approved heating contractor.

If you smell flue gas

B

Switch off the boiler (

Æ

page 7).

B

Open windows and doors.

B

Inform an authorized heating contractor.

Installation

B

Correct and proper installation and adjustment of the 
burner and the controls are the fundamental 
requirements for safe and economical operation of 
the boiler.

B

The boiler may only be installed or converted by an 
approved heating contractor.

B

Do not modify any parts that carry flue gas.

B

The hot water tank may only be used for heating 
domestic hot water.

B

Never shut off safety valves!

Water must be able to escape from the safety valve for 
the hot water system and piping when the water is 
being heated.

Maintenance and servicing

Heating systems should be regularly maintained for the 
following reasons:

Heating systems should be regularly maintained for the 
following reasons:

to maintain a high level of efficiency and to operate 
the system economically (low fuel consumption),

Warnings

 are indicated by a warning 

triangle and a grey background.

Notes

 are identified in the text by this 

symbol. They are separated by horizontal 
lines above and below the text.

Summary of Contents for Uni 5000F













Reviews: