Bosch TWK861 Series, Instruction Manual, Page: 17 / 22

15
en
Troubleshooting
The kettle does not heat up; the
temperature indicator does not light up.
– The overheat control has tripped.
■ Let the kettle cool down for some time
so that the appliance can be switched on
again.
The unit turns off before the water comes to
a boil.
– The kettle contains too much scale.
■ Descale the kettle as per the instructions.
Technical data
Electrical connection
(voltage – frequency)
220-240 V~
50/60 Hz
Power 2000-2400 W
Disposal
J
Dispose of packaging in an environ­
mentally­friendly manner. This
appliance is labelled in accordance
with European Directive 2012/19/EU
concerning used electrical and
electronic appliances (waste electrical
and electronic equipment – WEEE).
The guideline determines the frame­
work for the return and recycling
of used appliances as applicable
throughout the EU. Please ask your
specialist retailer about current
disposal facilities.
Guarantee
The guarantee conditions for this appliance
are as defined by our representative in the
country in which it is sold. Details regarding
these conditions can be obtained from
the dealer from whom the appliance was
purchased. The bill of sale or receipt must
be produced when making any claim under
the terms of this guarantee.
Changes reserved.
Cleaning and maintenance
W Risk of electric shock
Never immerse the device in water or place
it in the dishwasher!
Do not steam-clean the appliance.
■ Before cleaning, unplug the appliance
from the power outlet.
■ Clean the outside of the kettle and base
with a damp cloth. Do not use strong or
abrasive cleaning agents.
■ Remove the limescale filter, soak it in a
little vinegar, then rinse clean with clear
water.
■ Rinse the kettle and the limescale filter
with clear water.
Tip: Clean the stainless steel surface with a
commercial stainless steel care product.
Descaling
Regular descaling
■ makes your kettle last longer;
■ ensures proper function;
■ saves energy.
Descale the kettle with vinegar or a
commercial descaling agent.
■ Fill the kettle with water up to the
1.5 mark and bring to a boil. Next, add a
small amount of white vinegar and let it
sit for several hours. You can also use a
commercial descaling product and follow
the manufacturer’s instructions.
■ Rinse the kettle and the limescale filter
with clear water.
Warning: Never use hard objects to
remove limescale residue as this will
damage the seal.
Tip: If you use the kettle daily, descale
more frequently.