8
en
■ Press down the switch
4
; the switch
lights up. The water is heated.
■ The kettle switches off automatically
once the water has boiled.
The appliance can also be switched off at
any time by pulling up the ON/OFF switch
4
.
Warning:
If you remove the kettle
1
from
the base and replace it before the heating
process is over, the kettle will not continue
to heat the water.
N.B.:
Only operate the kettle with the lid
2
closed and the limescale filter
5
inserted,
otherwise the kettle will not switch off.
For physical reasons, the base
6
may
collect some condensation water. This is
normal; it does not mean that the kettle
1
leaks.
After boiling, let the kettle cool down for
5 minutes before refilling it with water.
Do not turn on the appliance if the kettle
1
is empty, otherwise the overheat control will
engage and the appliance will switch itself
off automatically.
Cleaning and maintenance
W
Risk of electric shock!
Never immerse the device in water or place
it in the dishwasher!
Do not steam-clean the appliance.
■ Before cleaning, unplug the appliance
from the power outlet.
■ Clean the outside of the kettle
1
and
base
6
with a damp cloth. Do not use
strong or abrasive cleaning agents.
■ Remove the limescale filter
5
, soak it
in a little vinegar, then rinse clean with
clear water.
■ Rinse the kettle
1
and the limescale filter
5
with clear water.
Congratulations on purchasing this
Bosch appliance. You have acquired
a high-quality product that will bring
you a lot of enjoyment.
Parts and operating
controls
1 Kettle (with water level indicator)
2 Lid with lock
3 Lid release button
4 ON/OFF switch, illuminated
5 Limescale filter (removable)
6 Base
7 Cable tidy
Important:
Use the kettle
1
only with its
included base
6
.
■
Only fill the kettle with water.
Milk and
instant beverages will burn and damage
the appliance. Never operate the kettle
1
without water and do not overfill it;
observe the
0.5
and
max
markings.
If the kettle is too full, the water will boil
over!
Before using for the
first time
■ Remove any stickers or film.
■ Unroll the right amount of cable from the
cable tidy
7
and plug it in.
■ Fill the kettle
1
with water. Bring the
water to a boil and discard it. Repeat the
procedure. This will make sure that the
kettle is clean for normal use.
■ When the water comes to a boil for the
first time, add a tablespoon of white
vinegar.
Boiling water
■ Fill the kettle with fresh water through
the spout or the open lid
2
(press lid
release button
3
).
■ Read the quantity on the water level
indicator. Do not fill with less than 0.5
litres or more than 1.7 litres of water!
■ Close the lid
2
until it locks and place
the kettle
1
on the base
6
.
Summary of Contents for TWK78A04
Page 3: ...max 1 7 L 3 4 6 7 1 2 a b d 5 c a b c d e g f ...
Page 77: ......
Page 78: ......
Page 87: ......
