Bosch Tronic 1500 TO Series, Installation And Operating Instructions Manual

Page: 11 / 24

Installation instructions
11
Tronic 1500 TO – 6720891050 (2019/08)
▶ The connection cable may not make
contact with hot components. This
can damage the insulation.
▶ If the electrical connection cable of
this appliance is damaged, it may only
be replaced by one of our authorised
customer service representatives in
order to avoid potential sources of
danger. The plug must be removed
from the mains before replacement.
H
General description
▶ The tap outlet must always remain
free. Do not use perlators (diffusers)
or shower taps.
▶ The warm water pipe may be hot.
Please inform and instruct children
appropriately.
▶ Do not use aggressive or abrasive
cleaning detergents.
▶ Do not use a steam cleaner.
H
Safety of electrical devices for
domestic use and similar
purposes
The following requirements apply in
accordance with EN 60335-1 in order to
prevent hazards from occurring when
using electrical appliances:
“This appliance can be used by children
of 8 years and older, as well as by people
with reduced physical, sensory or
mental capabilities or lacking in
experience and knowledge, if they are
supervised and have been given
instruction in the safe use of the
appliance and understand the resulting
dangers. Children shall not play with the
appliance. Cleaning and user
maintenance must not be performed by
children without supervision.”
“If the power cable is damaged, it must
be replaced by the manufacturer, its
customer service department or a
similarly qualified person, so that risks
are avoided.”
2 Installation instructions
2.1 Unpacking
▶ Inspect the new appliance for transport damage!
▶ Please dispose of the packaging, and if applicable, the old
appliance in an environmentally-friendly manner.
▶ Install the small water heater as shown in the
illustrations. Observe the instructions in the text.
The illustrations can be found in the back of the instruction
manual.
2.2 Scope of delivery/Dimensions

Fig. 1
2.3 Mounting TR1500...T
2.3.1 Water connection

Fig. 2
CAUTION:
Do not allow the existing tap mixer to become calcified.
A reduced flow rate will ruin the water heater.
2.3.2 Wall mounting

Fig. 3
For mounting without the wall hooks:
▶ observe the different dimensions.
2.3.3 Screwing on the Connection Hoses

Fig. 4
▶ Fit the sealing gasket.