Bosch TIS65 Series, Instruction Manual

Page: 19 / 192

15
en Menu
Coffee temperature
Specifying the temperature for coffee drinks
and hot water.
You can choose
normal
,
high
, or
max
.
The setting applies to all types of drink
preparation.
■ Use
I
to choose the desired
temperature level and touch
B
to
confirm your choice.
Water filter
Specifying whether a water filter should be
activated or whether no filter is used.
You can choose
Activate new filter
or
No filter
.
F
A water filter lessens limescale
deposits and reduces impurities in
water. The appliance also does not
need to be descaled so often.
Water filters are available from retail outlets
or from customer services (see the section
“Accessories”).
F
Important: Before you can use a
new water filter it will need to be
rinsed.
■ Use the measuring spoon 8 to press the
water filter firmly into the water tank 5 .
■ Fill the water tank with water up to the
“ max ” mark.
■ Connect the milk tube 4c to the milk
system 4b a nd the suction pipe 4d .
■ Insert the end of the suction pipe 4d into
the drip plate 17b .
■ Touch
A
and use
I
to select
Water filter
.
■ Touch
B
and use
I
to select
Activate new filter
.
■ Empty the drip tray and re-insert.
■ Touch
B
to confirm.
Water will now flow through the filter to
rinse it.
■ Then empty the drip tray and re-insert.
The appliance is ready for use again.
F
Rinsing the filter simultaneously
activates the setting for displaying the
message “
Please change water filter
”.
When this message appears, or at
the latest after two months, the filter
will no longer be effective. It needs to
be replaced for reasons of hygiene
and to prevent a build-up of limescale
(which could damage the appliance).
If you do not intend to insert a new filter,
select the setting
No filter
and touch
B
to confirm.
F
If the appliance has not been used
for a prolonged period (for example,
while you are on holiday), the existing
filter should be rinsed before the
appliance is used again. To do this,
simply dispense a cup of hot water.
Languages
Setting up the language to be used for
display texts.
■ Use
I
to choose the desired
language and touch
B
to confirm
your choice.
Frost protection
Service programme to prevent frost
damage during transportation and storage.
This programme completely empties the
appliance.
F
The appliance must be ready for use
and the water tank 5 must be filled.
■ Touch
C
to begin running the
programme.
■ Remove the water tank; the appliance
automatically empties all its pipes and
then switches itself off.
■ Empty the water tank
5
and the drip tray
17
.