31
en
Temp.
The brewing temperature (
high
/
middle
/
low
) can be set here.
Language
The display language can be set here.
Water hardness
The water hardness setting can be adjusted
on this appliance. It is important to set the
water hardness correctly, so that the appli-
ance indicates accurately when the descal-
ing programme should be run. The factory
setting for the water hardness is 4.
You can check the water hardness using
the enclosed test strip or by asking your
local water supplier.
Dip the test strip briefly in water, gently
shake off any drips, and check the result
after one minute.
Level Water hardness
German (°dH)
French (°fH)
1
2
3
4
1-7
8-14
15-21
22-30
1-13
14-25
26-38
39-54
Adjusting the
grinding unit
The rotary selector (3) adjusts the grind
settings from coarse to fine.
¡
Warning
Adjust the grinding unit only while it is
running! Otherwise the appliance may
be damaged. Do not reach into the
grinding unit.
● While the grinding unit is running, adjust
the rotary selector (3) from fine
(
a:
Turn anticlockwise) to coarse
(
b:
Turn clockwise) as required.
a
b
Note:
The new setting will not become
apparent until after the second cup of coffee.
Tip:
For dark roast coffee beans, choose a
finer grind, for lighter beans a coarser grind.
