2. Quick Start Guide
1
2
On/Off button
LED indicator
The TDL Freight Guard – TDL140 works immediately without any configuration or modification –
the device is preconfigured, SIM card and rechargeable battery are installed. Battery should
be charged for at least 5 hours prior to the first use.
CAUTION: Charger
Using the wrong charger could lead to insufficient charging status or electrical hazard
Only use the Bosch approved charger initially supplied with the device.
To turn the unit on,
press the On/Off button. The LED will flash
white
three times
To check battery status,
press the On/Off button. LED will switch on
green
for full battery
and
red
for battery under 95%.
To force communication to Cloud application
press long the On/Off button until
white
LED is switched On.:
1. The the LED will blink
green
until the unit successfully sends a message
(or 5 minutes have passed).
2. The LED will blink
red
until the unit successfully finds the GPS position
(or 5 minutes have passed).
The device uploadsall data automatically to TDL Cloud where you can manage and monitor
them (for further information see
6. Management and Monitoring of Devices
).
To turn the unit off
, press and hold (+10 seconds) the On/Off button until LED blinks. Device
will blink
green
(if the battery is fully charged) or
red
(if the battery is used) three times.
4
