1 695 301 840
2011-07-14
|
Robert Bosch GmbH
Maintenance | T�� ���� | ��
T�� ���� | ��
| ��
en
6. Maintenance
6.�
Suggested lubricants
�omponent
Lubricant
Standard
Gearbox
ESSO Spartan EP460 ISO 460 DIN 51502-
CLP ISO 34-98-CC
Hydraulic pump ESSO NUTO H 46
ISO 46 DIN 51502-HLP
DIN 51524 PART.2-
HLP ISO 67-43-HM
Pneumatic sys-
tem (conditio-
ning assembly)
ESSO FEBIS K 32
ISO VG 32
Tab. 1:
Lubricants table.
!
The manufacturer is not liable for any damage
caused by use of lubricants different from those
shown in the table.
6.2
�leaning and servicing
Before any cleaning or maintenance interven-
tion, disconnect the
TCE 5310
by means of
the main switch and disconnect the network.
To guarantee full efficiency of the TCE 5310 and to
ensure functioning without anomalies it is essential to
clean the machine regularly and carry out periodical
maintenance.
Maintenance has to be carried out by the operator
in accordance with the manufacturer's prescriptions
shown here below.
6.2.�
Service intervals
Maintenance
w
eekl
y
monthl
y
annual
Clean the mechanical moving parts, spray
them with nebulized oil or kerosene and lubri-
cate with appropriate grease
x
Check transmission belt tensioning in order to
avoid its sliding.
x
Check the hydraulic control unit oil level and
keep it always between minimum and
x
Check and maintain the grease level on the
self-centering and on the tool holding arm.
x
Lubricate with grease the sliding rail of the
trolley.
x
Change the oil in the hydraulic control unit.
x
Check the gearbox oil level.
x
6.2.2
�heck the hydraulic control unit oil level
1.
Power off the equipment.
2.
Unscrew the cap with measuring rod on the hydrau-
lic control unit.
3.
Check that the oil level is between MIN and MAX.
6.2.�
Gearbox oil change
1.
Put a collecting tank underneath the gearbox.
2.
Unscrew the oil discharge screw.
3.
Discharge the gearbox oil and dispose of it (see
chap. 7.3).
4.
Screw the oil discharge screw.
5.
Top up with new gearbox oil (see lubricant table).
6.�
Spare and wearing parts
Denomination
Order code
Rotary union
1 695 300 432
Anti-extrusion ring BR123
1 695 040 098
O-ring OR 123
1 695 040 093
Complete electrovalve 24V DC
1 695 042 413
Belt A33
1 695 042 198
4 position control lever
1 695 300 414
2 position switch
1 695 040 586
Nylon slider
1 695 300 232
Summary of Contents for TCE 5310
Page 2: ......
