52
| English
Bosch
TCC78K751 | 02/2014
7. Wipe out the inside of the tray holders.
8. Clean the milk frother (procedure de-
scribed below).
9. Replace all the parts again.
Important:
Drip tray for coffee
outlet (27) and coffee grounds
container (28) should be emptied
and cleaned daily to prevent mould
from developing.
If the appliance is switched off us-
ing the button (3)
Z
(rinsing and
switching off) or it switches off in
accordance with the “Auto off after”
settings, the rinsing process will
automatically take place. In other
words the pipework inside the ap-
pliance is cleaned by the machine
itself.
Important:
If the appliance has not
been used for a prolonged period
of time (e.g. after a vacation), clean
the entire appliance thoroughly, in-
cluding the milk system and brew-
ing unit.
Cleaning the milk system
Risk of burns! The milk frother
(12) gets very hot. After use,
allow to cool down first before
touching.
The message
Please short rinse the milk system
.
Press
O
appears
– if cleaning has not been performed after use
– if the appliance has just switched off
automatically and it was not cleaned
beforehand.
If this message appears, start with Step 2
under “Short rinse for milk system”.
Clean the milk system immediately after use.
Short rinse for milk system:
1. In the menu for drink selection, select
Short rinse
and press
o
start/stop (10).
2. Place a cup under the milk frother (12)
and the end of the milk tube in the cup.
3. Press
o
start/stop (10). The appliance
now fills the cup automatically with water
and draws it in again through the milk
tube for rinsing. The rinse procedure
takes about 1 minute.
4. Empty the cup and clean the milk tube.
All the parts can also be put in the
dishwasher.
