16
Robert Bosch Hausgeräte GmbH
en
Steam for heating drinks
!
Risk of burns
The nozzle gets very hot. Do not touch the
metal parts.
The appliance must be ready for use.
● Push the sleeve on the nozzle
8
all the
way
up
.
● Press the steam button
h
. The LED will
start to lash.
i
The appliance will now heat up for
approx. 20 seconds.
● Immerse the nozzle
8
deep into the liquid
you want to heat.
● As soon as the
J
LED lashes, turn the
dial
6
to
g
/
h
.
!
Risk of scalding
When the dial
6
is set to
g
/
h
, the nozzle
8
may sputter a little. Escaping steam is very
hot and may cause liquid to sputter. Do not
touch the nozzle
8
or point it at anyone.
● End the process by turning the dial
6
back to “
O
”.
i
To generate more steam, press the steam
button
h
again and repeat the whole
process.
Note:
When the nozzle
8
has cooled down,
clean immediately. Dried residue is dificult
to remove.
Maintenance and daily
cleaning
!
Risk of electric shock!
Unplug the appliance before cleaning it.
Never immerse the appliance in water.
Do not use a steam cleaner.
● Wipe the outside of the appliance with a
damp cloth. Do not use scouring agents.
● Always remove any limescale, coffee,
milk or descaling luid residue immedi
-
ately. Such residue can cause corrosion.
● Wash all removable parts by hand only.
● Rinse out the water tank
11
with water
only.
● Remove, empty and clean the trays for
coffee grounds
17
and residual water
18
.
● Wipe out the inside of the appliance (tray
holders).
● Open the doors to the brewing unit
1
and remove any coffee residues. Close
the doors.
Note:
If the appliance is cold when switched
on, or if it is switched to “
eco
” mode after
dispensing coffee, it rinses automatically; in
other words the system cleans itself.
Nozzle 8 for hot water/steam
● Unscrew the nozzle
8
from the steam
pipe.
● Dismantle all parts (
Fig. D
).
● Clean with a caustic cleaning solution and
a soft brush. Clean the tip of the nozzle
8/c
with a blunt needle.
● Thoroughly rinse and dry all parts.
Brewing unit
The brewing unit can be removed for
cleaning
(Fig. E)
.
● Press the
eco
button to start the
automatic rinse cycle.
● Turn the power on/off switch
1
to 0.
● Open the door
1
to the brewing unit
.
● Hold the red button
a
down and push
the handle
b
up until you hear it
engage.
● Grasp the brewing unit
by the handle,
remove carefully, and rinse under running
water. Do not use cleaning agents. Do not
place in the dishwasher.
● Vacuum the inside of the appliance, or
clean it with a damp cloth.
● Reinsert the brewing unit
all the way
into the appliance.
● Hold the red button
a
down and push
the handle
b
down as far as it goes,
until you hear it engage. The brewing unit
is now secure.
● Close the doors of the brewing unit.
Summary of Contents for TCA 52 SERIES
