32
Robert Bosch Hausgeräte GmbH
en
Problem
Possible!cause
Solution
The appliance does not
recognise the inserted
T DISC and remains in
standby mode or the
Status LED
F
lights up
red.
Appliance is not switched
on.
Make sure the appliance is
switched on before inserting a
T DISC.
No T DISC inserted.
Check if T DISC has been inserted.
The barcode could not be
detected.
Clean the T DISC barcode reading
window and try again or smooth
the barcode on the T DISC out with
your thumb.
Use another T DISC.
If problems persist contact the
TASSIMO careline.
The brewing system is
not properly closed.
Clean the brewing system
thoroughly, especially in the area of
the clamp.
The quality of the foam /
crema has deteriorated.
The drink outlet is
clogged or dirty.
Remove the drink outlet from the
brewing unit and detach the pierc
ing unit. After cleaning everything
thoroughly, reassemble the parts
and replace them in the brewing
unit.
Clean the brewing unit with the
Service T DISC.
The appliance needs
descaling.
Descale the appliance (for details
see “Descaling”).
Brewing unit cannot be
securely closed.
T DISC Piercing unit
or T DISC holder is not
properly inserted.
Insert T DISC holder or T DISC
piercing unit properly.
The T DISC is not in
serted properly.
Reinsert the T DISC and make
sure it is properly positioned.
The brewing unit is not
properly closed.
Push the handle down until it snaps
into place with an audible click.
Clean the brewing system thor
oughly, especially in the area of the
clamp.
Brewing unit cannot be
opened.
The brewing unit is still
locked.
Wait until the Status LED
F
has
stopped blinking before attempting
to open the brewing unit.
Water dripping from the
brewing unit.
The T DISC is damaged
or leaky.
Stop the brewing process. Wait
until the machine is cooled down
before removing the T DISC and
then clean the brewing unit
The piercing unit is
either not inserted or not
inserted properly.
Check to ensure that the piercing
unit is inserted properly.
TAS43_EU.indb 32
21.12.2012 10:51:52
