Bosch T10012, Original Instructions Manual

Page: 7 / 246

1 General Information
Product name: Engine support
Product type: Load holding device
Product number: T10012
Weight: 7.58 kg
Max. load capacity: 385 kg
Static test coefficient: 3.0
Intended Use:
The engine support serves for holding various engine
and gearbox units in accordance with the workshop
manuals of the Volkswagen Group brands.
Terms of Use:
Only for qualified workshop personnel.
Only use the load holding device for work approved
by the Volkswagen Group.
Only for use by qualified personnel with gas
powered vehicles.
Use only for loads up to 385 kg.
Only use in connection with a suitable engine and
gearbox jack (e.g. VAS 6931/V.A.G. 1383A) (see
workshop manuals of the Volkswagen Group
brands).
Do not hold or lift any persons or animals.
Do not hold or lift articles other than described in
the workshop manuals of the Volkswagen Group
brands.
Do not stand under suspended loads.
Only use on level, horizontal and weight-bearing
ground.
Only use in connection with the approved
accessories (see workshop manuals of the
Volkswagen Group brands).
Figure 1: Engine support T10012
1 Base plate with reception bolts
2 Hexagon screw M10 x 25, 8.8 with hexagon screw ISO 4032-
M10-8
3 Bolt 22 mm x 160 mm
4 Bolt 22 mm x 150 mm
5 Hexagon screw M12 x 35, 8.8 with spring ring (2 pieces)
en | 7 | T10012
2018-05-09 Bosch Automotive Service Solutions GmbH
Am Dörrenhof 1
85131 Pollenfeld-Preith
Germany