Cleaning and maintenance NL
3.
Pull the micro sieve downwards.
Cleaning spray arms
Limescale and impurities in the wash
water can block the nozzles and
bearings of the spray arms. Clean the
spray arms regularly.
1.
Unscrew the upper spray arms and
unscrew them downwards.
Pull .
4.
Press the locking pieces together
and remove the coarse sieve
remove upwards .
1
2
2
1
2.
Pull the lower spray arm upwards.
5.
Clean the sieve elements under
running water.
Carefully clean the dirt edge
between the coarse and fine sieve.
6.
Assemble the screening system.
Check whether the locking lugs of
the coarse sieve are engaged.
3.
Check the nozzles of the spray arms
for blockages under running water
and remove any foreign objects.
7.
Insert the sieve system into the
device and turn the coarse sieve
clockwise.
Check that the arrow marks are
opposite each other.
4.
Install the lower spray arm.
a The spray arm audibly clicks into place.
5.
Fit and screw on the upper
spray arms.
37
