en
Filters
The filters
1J
keep large foreign
objects in the rinsing water away from
the pump. These foreign objects may
occasionally block the filters.
–
After each wash cycle check the filters
for residue and clean if required.
–
After unscrewing the coarse microfilter,
you can take out the filter group.
–
Remove any residue and clean filters
under running water.
–
Re-install filter system in reverse
sequence and ensure that the arrow
marks are opposite each other after
closing the filter system.
Spray arms
Limescale and contaminants in the rinsing
water may block nozzles
and bearings on the spray arms
12
and
1:
.
–
Check outlet nozzles on the spray
arms for blockages.
–
Unscrew the upper spray arm
12
.
–
Remove the lower spray arm
1:
upwards.
–
Clean spray arms under running water.
–
Re-engage or screw on spray arms.
&RDUVHPLFURILOWHU
