en-us
Before using for the first time
20
Before using for the first time
8 Before using for the
first time
Before using for the first time
Apply the settings for the first use.
8.1 Initial use
On initial use or after reset to the
factory settings, you will need to
configure settings.
Tip: Connect your appliance to a
mobile device. You can conve-
niently change all settings using
the Home Connect™ app.
Requirement: The appliance has
been installed and connected.
1.
2.
3.
Tip: You can change these set-
tings and other Basic settings
Rinse aid system
9 Rinse aid system
Rinse aid system
You can use the rinse aid system
and rinse aid to get dishware and
glasses rinsed perfectly without
spots.
9.1 Rinse aid
For optimum drying results, use
rinse aid.
Only use rinse aid intended for
household dishwashers.
Adding rinse aid
If the rinse aid refill indicator lights
up, fill the dispenser with rinse
aid. Only use rinse aid intended
for household dishwashers.
1.
Press the catch on the lid of the
dispenser for rinse aid and
lift .
1
2
2.
Add rinse aid up to the max
mark.
max
3.
If rinse aid spills out, remove it
from the tub.
Spilled rinse aid can cause ex-
cessive frothing during the
wash cycle.
4.
Close the lid of the dispenser
for rinse aid.
a
The lid clicks into position.
9.2 Setting the amount of
rinse aid
If there are streaks or water spots
on dishware, change the amount
of rinse aid.
1.
Press
.
2.
To open the basic settings,
press
for 3 seconds.
a
The display shows
.
3.
Press
repeatedly un-
til the display shows the value
set at the factory r04.
