Bosch SPV4EMX16E User Manual Download Page 52

Page: 52 / 60

Troubleshooting

Information on display panel

Fault

Cause

Troubleshooting

Special salt refill indicator
lights up.

Insufficient special salt.

▶

Add "Special salt"

→

Page 24

Sensor does not detect spe-
cial salt tablets.

▶

Do not use special salt tablets.

Refill indicator for special
salt does not light up.

Water softening system is
switched off.

▶

Setting the water softening system

Refill indicator for rinse aid
lights up.

Insufficient rinse aid.

Add "Rinse aid"

→

Page 26

Set the amount of rinse aid to be
dispensed.

→

"Setting the amount of rinse aid",

Page 26

Refill indicator for rinse aid
does not light up.

Rinse aid system is switched
off.

▶

Set the amount of rinse aid to be
dispensed.

Display flashes.

Appliance door is not closed
properly.

▶

Close the appliance door.

‒

Arrange the tableware so
that no parts project beyond
the basket and prevent the
appliance door from closing
properly.

Malfunctions

Fault

Cause

Troubleshooting

Water is left in the appliance
at the end of the pro-
gramme.

Filter system or area under
the filters is blocked.

Clean the "Filters"

→

Page 40

Clean the "Wastewater pump"

→

Page 55

Programme has not yet
ended.

▶

Wait until the programme ends or
cancel the programme with

Reset

▶

→

"Terminate programme",

Page 32

Appliance cannot be
switched on or operated.

Software update is taking
place.

▶

Wait until the software update has
finished.

Appliance functions have
failed.

Pull out the mains plug or switch off
the fuse.

Wait at least 2 minutes.

Connect the appliance to the power
supply.

Switch the appliance on.

Appliance does not start.

The mains fuse has tripped.

▶

Check the relevant fuse.

Summary of Contents for SPV4EMX16E





























































Search results

Summary of Contents for SPV4EMX16E

Reviews:

Related manuals for SPV4EMX16E

Brands by name

Popular brands

Bosch SPV4EMX16E, User Manual

Search results

Summary of Contents for SPV4EMX16E

Reviews:

Related manuals for SPV4EMX16E

Brands by name

Popular brands