Bosch SPV2HKX1DR, Information For Use

Page: 35 / 52

Basic settings
en
35
Basic setting Selection Description
Remote Start Scale with 3 levels Activate or deactivate the
function.
→
"Activating Remote
Start ", Page 36
This basic setting is not
available until you have
connected the appliance
with the Home Connect
app.
→
"Home Connect ",
Page 36
Factory setting Reset Restore changed set-
tings to the factory set-
tings.
The settings for initial
start-up must be con-
figured.
→
"Restoring factory set-
tings", Page 36
1
Factory setting (may vary according to model)
Setting Extra Dry
1.
Press ⁠.
2.
To open the appliance settings,
press
for 3 seconds.
a
flashes.
3.
Press repeatedly until
and flash.
4.
Press repeatedly until the
LEDs show the right value.
A
If LED A is not lit up, Extra Dry is
switched off.
If LED A is lit up, Extra Dry is
switched on.
5.
To save the settings, press
for 3 seconds.
Setting signal volume
1.
Press ⁠.
2.
To open the appliance settings,
press
for 3 seconds.
a
flashes.
3.
Press repeatedly until
and flash.
4.
Press repeatedly until the
right signal volume has been set.
A C B
0, 1, 2 or 3 LEDs will light up ac-
cordingly. The signal tone selected
will be heard.
The factory setting is level 2 (LED
A and LED B).
5.
To save the settings, press
for 3 seconds.