en-us
Troubleshooting
42
Issue
Cause and troubleshooting
Plastic parts inside
the appliance are
discolored.
Plastic parts inside the appliance may become
discolored over the life of the dishwasher.
▶
Discoloration may come about and will not im-
pair functioning of the appliance.
Plastic parts are dis-
colored.
Dishwashing temperature is too low.
▶
Select a program with a higher dishwashing
temperature.
Dishware has been precleaned too intensively.
The sensors then choose a weaker program.
Stubborn soiling cannot be entirely removed.
▶
Only remove large remnants of food and do not
prerinse dishware.
There are remov-
able streaks on
glasses, glassware
with a metallic ap-
pearance and silver-
ware.
Amount of rinse aid to be dispensed is set too
high.
▶
Set the rinse aid system to a lower setting.
No rinse aid has been added.
▶
There is detergent residue in the final rinse. Lid of
detergent dispenser is blocked by dishware and
will not open fully.
1.
Arrange dishware in the upper rack so the tab
collecting tray is not obstructed by dishware.
Items of dishware are blocking the dispenser
lid.
2.
Do not place dishware or fragrance dispensers
in the tab collecting tray.
Dishware has been precleaned too intensively.
The sensors then choose a weaker program.
Stubborn soiling cannot be entirely removed.
▶
Only remove large remnants of food and do not
prerinse dishware.
Irreversible clouding
of glassware.
Glasses are not dishwasher-proof, only suitable
for dishwashers.
▶
Use dishwasher-proof glasses.
Glasses are usually only suitable for cleaning
in a dishwasher, i.e. long-term wear or long-
term changes must be expected.
▶
Avoid a lengthy steam phase (standing time af-
ter wash cycle ends).
▶
Use a program with a lower temperature.
▶
Use detergent with a glass protection compo-
nent.
