Learning in wireless keyfob to the Solution 3000
Add or Delete RF Wireless Keyfob
Add RADION Keyfob
Notice! Solution 2000 does not support RADION keyfobs. Set RF receiver as RADION Receiver B810 (Value 1 in
Location 395).
• Enter the Master Code,
followed by [1] and the
[#] key (for example,
[25801#]).
1
• Use manual mode or auto mode to configure RADION keyfob
RFID.
- In manual mode, enter the 9-digit RF device ID number,
followed by the [#] key.
- Or press [#] key to switch into auto mode. When icon numbers
(1 to 16) flash, press button 1 or 2 of the keyfob. The panel
learns the RADION Keyfob ID number and the last digit of RFID
number displays on the codepad. Press [#] key to confirm.
3
• Enter the RADION keyfob number (301 to 332) you want
to add (301 = keyfob 1, 302 = keyfob2, etc.), followed by
the [#] key. Up to 32 RADION keyfobs can be added, but
only current keyfob number (1 to 16) displays through zone
indicators on the ICON codepad.
2
4
• Enter [#] key to confirm
the operation, or press [*]
to cancel
Delete RADION Keyfob
• Enter the Master Code,
followed by [1] and
the [#] key
1
• Enter the RADION
keyfob number (301
to 332) you want to
delete, followed by the
[#] key.
2
• Press the [*] key to
delete the RADION
Keyfob.
3
