background image

Tableware

 en

33

2.

Add the detergent to the dry deter-
gent dispenser.

15 ml

25 ml

50 ml

If you are using tablets, one is
enough. Insert the tablets in a hori-
zontal position.
If you are using powder or liquid
detergent, follow the manufac-
turer's instructions and quantities
for dosage in the detergent dis-
penser.
20 ml – 25 ml detergent is suffi-
cient for normal soiling. If table-
ware is only lightly soiled, slightly
less than the amount of detergent
specified is usually sufficient.

3.

Close the lid of the detergent dis-
penser.

a

The lid clicks into position.

a

The detergent dispenser will open
automatically at the optimum time
during the programme. Powder or
liquid detergent will spread around
the washing tank and dissolve
there. Tablets will fall into the tablet
collecting tray and dissolve in the
right dosage. In order to ensure
that tablets can dissolve evenly, do
not place any other objects in the
tablet collecting tray.

Tip: 

If you use powder detergent and

select a program with pre-rinse, you
can also add a little detergent to the
interior door of the appliance.

Tableware

Tableware

Tableware

Only clean tableware that is suitable
for dishwashers.

Note: 

Decorated glassware and parts

made of aluminium or silver may
fade or discolour with dishwashing.
Delicate types of glass may turn
cloudy after a few washing cycles.

Summary of Contents for SMV6ZDX49E

































































Reviews: