NL Home Connect
Basic setting
Display text
Choise
Description
Factory setting
re:
Start with
Y:ES
Confirm with
Reset changed settings
to the factory state.
The settings for the first
start-up must be specified.
1
Factory setting (may differ depending on the device type)
Change basic settings
availability of Home Connect services in
your country. Information on this can be
found at: www.home-connect.com. To be
able to use Home Connect, you must first
establish the connection to the WLAN
home network (Wi-Fi
1)
and can be
configured with the Home Connect app.
s
The Home Connect app guides you
through the entire registration
process. Follow the instructions in the
Home Connect app to make the
settings.
1.
Open the appliance door.
to press.
3.
Approx. 3 seconds on
2.
on
Busy-
to access the basic settings.
a The display shows H:xx
reflected
to give.
a The display shows
to give.
4.
Just as often on
to press
until the display shows the desired
setting.
5.
Press or repeatedly until
the display shows the desired
value.
Tips
s Take the supplied document
of Home Connect.
s Also take the directions
the Home Connect app.
You can change several settings.
6.
To save the settings, approx.
to press.
3 seconds on
7.
Close oven door.
Note Observe the safety instructions
in these operating instructions and
make sure that they are also
observed when you operate the
appliance via the Home Connect app.
huh
huh
uncle Connect
uncle Connect
huh
This device is suitable for networks.
Connect your device to a mobile end
device to be able to operate
functions via the Home Connect app.
The Home Connect services are not
available in every country. The
availability of the Home Connect
function depends on the availability
uncle Connect
1
Wi-Fi is a registered trademark of the Wi-Fi Alliance.
42
Summary of Contents for SMV6ZCX42N
Page 67: ......
