Home Connect
NL
Quick start with Home
Connect
Home Connect settings
Adapt Home Connect to your needs.
You will find the Home Connect
settings in the basic settings of your
appliance. Which settings the display
shows depends on whether Ho-
me Connect is installed and whether
the device is connected to the home
network.
Connect the device quickly and easily
to a mobile end device.
Install app
1.
Install the Home Connect app on
your mobile end device.
Remote Start
You can start the appliance with your
mobile terminal device via the Home
Connect app.
2.
Launch the app and configure
access for Home Connect.
Tip: If you are in the "Basic Settings"
Page 41 from this function "rc:02"
the function is permanently activated
and you can start the device at any
time with a mobile end device.
The Home Connect app guides you
through the entire registration process.
Connect device to WLAN home
network (Wi-Fi)
Conditions
Remote Start
activate
s The Home Connect app is on the
mobile terminal installed.
s Wifi on the router is activated.
s The basic Wi-Fi setting is on the
device activated.
s The appliance has
cation reception of the WLAN
home network (Wi-Fi).
If you have set "rc:01" in the basic
settings of this function, you activate
the function on your device.
Conditions
s The device is connected to the WLAN
home network connected.
s The appliance is connected to the Home Con-
net app connected.
s In the "Basic settings"
Page 41 of this function is
"rc:01" set.
s A program has been selected.
1.
Scan the QR code using the Home
Connect app.
▶
impressions.
When you open the appliance door, the
function is automatically deactivated.
a Button is lit.
Tip: To deactivate the function on
to press.
2.
Follow the instructions of the
Home Connect app.
43
Summary of Contents for SMV6ZCX42N
Page 67: ......