background image

en 

Basic operation

32

Setting a programme

To adjust the wash cycle to the soil-
ing level of the tableware, select a
suitable programme.

Press the right programme button. 
→ 

"Programmes", Page 17

a

The programme is set and the pro-
gramme button flashes.

a

The remaining running time of the
programme appears on the dis-
play.

Setting additional functions

You can set additional functions to
complete the washing programme
selected.

Note: 

The additional functions which

can be used depend on the pro-
gramme selected. 
→ 

"Programmes", Page 17

Press the button for the relevant
additional function. 
→ 

"Additional functions", Page 19

a

The additional function is set and
the additional function button
flashes.

Setting timer programming

You can delay the start of the pro-
gramme by up to 24 hours.

1.

Press  ⁠.

a

"h:01" appears in the display.

2.

Use   to set the required start
time for the programme.

3.

Press 

⁠.

a

This activates timer programming.

Tip: 

To deactivate timer program-

ming, press   repeatedly until "h:00"
appears in the display.

Starting the programme

Press 

.

a

The programme has ended when
the display shows "0h:00m".

Notes

¡

If you want to add more tableware
while the appliance is running, do
not use the tablet collecting tray as
a handle for the top basket. You
might touch the partially dissolved
tablet.

¡

You can only change a pro-
gramme when running if you can-
cel it. 
→ 

"Terminate programme",

Page 32

¡

The appliance switches off auto-
matically 1 minute after the end of
the programme to save energy. If
you open the appliance door im-
mediately after the programme has
ended, the appliance will switch off
after 4 seconds.

Interrupting programme

Note: 

When you open the appliance

door once the appliance has heated
up, leave the door slightly ajar for a
few minutes and then close it. This
will help prevent excess pressure
building up in the appliance and stop
the appliance door bursting open.

1.

Press  ⁠.

a

The programme is saved and the
appliance switches off.

2.

Press   to resume the pro-
gramme.

Terminate programme

To end a programme early or to
switch from a programme that has
already started, you will need to can-
cel it first.

1.

Open the appliance door.

Summary of Contents for SMV4HVX46G





























































Reviews: