background image

Home Connect 

 en

37

Activating Remote Start 

When you have selected "rc1" in the
basic settings of this function, activ-
ate the function on your appliance.

Requirements

¡

The appliance is connected to your
WLAN home network.

¡

The appliance is connected to the
Home Connect app.

¡

"rc1" is selected in the "Basic set-
tings " → 

Page 35

 of this function.

¡

A programme is selected.

Press 

⁠.

If you open the appliance door, the
function is automatically deactiv-
ated.

a

 button lights up.

Tip: 

To deactivate the function, press

⁠.

Remote Diagnostics

Customer Service can use Remote
Diagnostics to access your appliance
if you contact them, have your appli-
ance connected to the Home Con-
nect server and if Remote Dia-
gnostics is available in the country in
which you are using the appliance.

Tip: 

For further information and de-

tails about the availability of Remote
Diagnostics in your country, please
visit the service/support section of
your local website: www.home-con-
nect.com

Software update

You can use this function to update
the software of your appliance, e.g.
for optimisation, troubleshooting or
safety-relevant updating.
The Home Connect app informs you
about available software updates.

Data protection

Please see the information on data
protection.
The first time your appliance is
registered on a home network
connected to the Internet, your
appliance will transmit the following
types of data to the Home Connect
server (initial registration):

¡

Unique appliance identification
(consisting of appliance codes as
well as the MAC address of the
Wi-Fi communication module in-
stalled).

¡

Security certificate of the Wi-Fi
communication module (to ensure
a secure data connection).

¡

The current software and hardware
version of your appliance.

¡

Status of any previous reset to
factory settings.

This initial registration prepares the
Home Connect functions for use and
is only required when you want to
use the Home Connect functions for
the first time.

Note: 

Please note that the

Home Connect functions can only be
utilised with the Home Connect app.
Information on data protection can be
retrieved in the Home Connect app.

Summary of Contents for SMV4HVX46G





























































Reviews: